Original CAT Brand 950GC Model Wheel Loader CAT Engine 3.5M3 Bucket Capacity

Original CAT Brand New 950GC Model Wheel Loader CAT Engine 3.5M3 Bucket Capacity

Engine Model: Cat® C7.1

Bucket Capacities 2.5 m3 to 4.4 m3
Rated Net Power @ 2,200 rpm – ISO 9249 151 kW (202 hp)

Weights Rated Gross Power @ 2,200 rpm – ISO 14396 168 kW (225 hp)

Operating Weight: 18 676 kg
For 3.3 m3 general purpose buckect with BOCE

Engine

Engine Model Cat C7.1
Rated Net Power @ 2,200 rpm – ISO 9249 151 kW (202 hp)
Rated Gross Power @ 2,200 rpm – ISO 14396 168 kW (225 hp)
Max Gross Power @ 2,000 rpm – ISO 14396 171 kW (229 hp)
Max Gross Torque @ 1,400 rpm 1020 N·m
Max Net Torque @ 1,300 rpm 931 N·m
Bore 105 mm
Stroke 135 mm
Displacement 7.01 L
Weights
Operating Weight 18 676 kg
• For 3.3 m3
general purpose buckets with BOCE.
Operating Specifications

Static Tipping Load Full 40° Turn – 10 503 kg
ISO 14397-1*
Static Tipping Load Full 40° Turn – 11 197 kg
Rigid Tires**
Breakout Force 147 kN
• For 3.3 m3
general purpose buckets with BOCE.
*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which
requires 2% verification between calculations and testing.
** Compliance to ISO (2007) 14397-1 Sections 1 thru 5.
Transmission

Forward 1 7.0 km/h
Forward 2 12.5 km/h
Forward 3 22.0 km/h
Forward 4 34.0 km/h
Reverse 1 7.0 km/h
Reverse 2 12.5 km/h
Reverse 3 22.0 km/h
• Maximum travel speeds (23.5-25 tires).
• Maximum travel speed in standard vehicle with empty bucket
and standard L3 tires with 760 mm (30 in) roll radius.

Service Refill Capacities

Fuel Tank Size 290 L
Cooling System 48 L
Crankcase 20 L
Transmission 45 L
Differentials and Final Drives – Front 40 L
Differentials and Final Drives – Rear 38 L
Hydraulic Tank 120 L
Hydraulic System
Implement System Pump Type Piston
Steering System Pump Type Piston
Implement System – Maximum Pump Output 248 L/min
@ 2,200 rpm
Implement System – Maximum Operating 27 900 kPa
Pressure @ 50 ± 1.5 L/min
Implement System – Optional 3rd Function 20 680 kPa
Maximum Pressure @ 70 L/min
Implement System – Optional 3rd Function 280 L/min
Maximum Flow
Hydraulic Cycle Time – 6.1 Seconds
Raise from Carry Position
Hydraulic Cycle Time – 1.2 Seconds
Dump at Maximum Raise
Hydraulic Cycle Time – 2.8 Seconds
Lower, Empty, Float Down
Hydraulic Cycle Time – Total Cycle Time 10.1 Seconds
Tires
• Choices include:
23.5-25 16PR, L3 (Triangle)
23.5R25 ★★, L3 (Triangle)
23.5R25 ★, L3 (Bridgestone)

Dimensions

All dimensions are approximate and based on L3 Triangle 23.5-25 Bias tires
1 Height to Top of ROPS 3458 mm
2 Height to Top of Exhaust Pipe 3596 mm
3 Height to Top of Hood 2568 mm
4 Ground Clearance 460 mm
5 B-Pin Height 4188 mm
6 Center Line of Rear Axle to Edge of Counterweight 2001 mm
7 Wheelbase 3300 mm
8 B-Pin Height @ Carry 655 mm
9 Center Line of Rear Axle to Hitch 1650 mm
10 Rack Back @ Maximum Lift 60 degrees
11 Dump Angle @ Maximum Lift 52 degrees
12 Rack Back @ Carry 45 degrees